General Contractor in Albuquerque, New Mexico
Sunset Valley Construction LLC is an Albuquerque-based residential and commercial general contractor providing construction, remodeling, repair, and property-improvement services throughout the metro area.
Our Albuquerque projects may include commercial remodeling, tenant improvements, HOA andproperty-management construction, home additions, residential renovations, masonry, CMU walls,concrete, stucco, roofing, drywall, painting, doors, and exterior repairs.
As a local contractor, we understand that Albuquerque properties can vary considerably by age, construction system, subdivision, elevation, lot size, and building type. Projects are evaluated individually so the scope reflects the actual property and intended work.
Relevant Services
- Commercial remodeling
- Tenant improvements
- HOA construction
- Property-management repairs
- Home additions
- Residential remodeling
- Masonry
- CMU walls
- Concrete
- Stucco
- Roofing
- Drywall
- Painting
- Doors and hardware
About Albuquerque, NM
Founded in 1706 as a Spanish villa near the Rio Grande, Albuquerque is now the largest city in New Mexico and the seat of Bernalillo County. Old Town preserves the original plaza and its adobe buildings, while the Sandia Mountains rise along the eastern edge and define the skyline. Its high desert setting shapes how buildings here are designed, sealed, and maintained.
Central Avenue follows the historic Route 66 corridor through Nob Hill, where mid century homes and small local storefronts sit side by side. Interstates 25 and 40 cross near downtown, tying the Northeast Heights, the University of New Mexico district, and the newer West Side neighborhoods into one busy, connected metro.
Employers such as Kirtland Air Force Base, Sandia National Laboratories, and the university keep housing and commercial space in steady demand. Subdivisions range from older adobe and Pueblo Revival houses to recent stucco tract homes, and each construction era brings its own repair, remodeling, and maintenance needs.
About - Location
Paragraph
How a General Contractor Handles Masonry and Stucco in Albuquerque, NM
Masonry and stucco succeed or fail at the substrate. A CMU wall needs a properly poured footing, reinforcement matched to the load, and grout placed so every cell fills completely. Stucco applied over block or framing then needs the right lath, weather barrier, and cure conditions before any finish coat goes on.
Dry air and strong sun pull moisture out of fresh stucco and mortar quickly, which raises the risk of cracking when curing is rushed. Dampening surfaces, shielding new work from wind, and controlling coat thickness keep a finished wall from developing shrinkage cracks within its first year of service.
Concrete follows the same logic. Slabs must slope water away from foundations, control joints need to land where the surface will crack anyway, and freeze and thaw cycles punish poorly finished flatwork. A general contractor ties these trades together so a wall, a slab, and a stucco finish are built in the right order.
Our Services in Albuquerque, NM
What a General Contractor Plans Before Commercial Remodeling in Albuquerque, NM
Tenant improvements begin long before demolition. Existing plans get compared with the actual space, and the scope is written trade by trade so framing, drywall, painting, doors, and hardware are coordinated together instead of arriving as separate surprises. Settling those details early gives an owner a realistic picture of the job.
Occupied buildings add another layer. Work areas need protected paths, dust control, and staging that keeps neighboring tenants operating. Roofing, stucco, and exterior repairs are often sequenced around the monsoon season so open roofs and unfinished exteriors are never left exposed to sudden storms. Temporary shutoffs are also scheduled and communicated to affected occupants. Noise limits matter too.
HOA and property management work follows a similar pattern with more stakeholders involved. Board approvals, resident notices, and recurring repair lists all shape the schedule, so a clear scope and a single point of coordination keep common area improvements from stalling. Finishes such as paint colors and door hardware are often confirmed with the board before anything is ordered.
Why Albuquerque Residents Trust Sunset Valley Construction LLC
Clients choose us because we've been a professional general contractor in Albuquerque, NM that keeps scopes readable and work organized. Our New Mexico GB-98 General Building Contractor license covers a broad range of residential and commercial construction, so a single contract can coordinate several trades under one point of accountability.
Owner involvement is the part clients notice most. The same person who evaluates a property stays on through construction and closeout, so questions reach someone who knows the job. We also insist on proper preparation, compatible materials, and construction that meets code, because a stucco coat over a weak substrate fails in this climate no matter how it looks on day one.
Communication is treated as part of the workmanship. Clients receive a defined scope, a clear contact, and an honest account of what falls inside and outside the proposal, which keeps expectations aligned from the first walkthrough to the final punch list, with any change confirmed in writing.
Tell Us What You're Building in Albuquerque
Have a project in this area? Submit the scope, location, budget, timeline, and available photos or plans through our Project Planner.
What our customers have to say...
Testimonials
Arturo and his crew do a fantastic job. They are responsible, on time on budget,and most of all a hard working group of great guys. I would highly recommend them for any of your home repairs needs. Great job
Cathy T.
Fantastic work! Arturo always gets back to me quickly, makes scheduling easy and shows up when he says he will. Great communication and friendly, professional service. They have fixed my stucco and worked on my swamp cooler and each time the work has been done well. I’m grateful to have someone reliable to call.
Kristen S.
These guys were fast great professional I even held back to see how it handled some great rains before reviewing really awesome work
manuel r.
Highly professional and great work - came out timely and fixed everything from faucets to concrete! Highly recommend!!
Camila J.
Frequently Asked Questions
How are masonry, stucco, and roofing sequenced on one project?
We order the trades so each finishes before the next depends on it. Masonry and structural repairs come first, roofing closes the building envelope, and stucco goes on last, which protects finished surfaces and avoids repeat repairs.
What must a CMU wall have before stucco goes on?
A sound footing, fully grouted cells where reinforcement runs, and a clean, cured surface. At Sunset Valley Construction LLC we check for cracks and moisture first, since stucco over a weak substrate lets problems show through the finish.
Why write a tenant improvement scope before demolition?
Demolition reveals what sits behind the walls, so framing, electrical routing, doors, and finishes are easier to settle first. We write the scope trade by trade so tenant and property manager approve the plan before work begins.
How does HOA construction differ from private home work?
HOA work adds board approvals, resident notices, and shared spaces that stay in use. We plan access, staging, and communication around those limits, so common area repairs advance without disrupting residents or leaving areas exposed.
What disruption should I expect during a home addition?
Expect a defined work zone, some noise, and changes to how nearby rooms are used. We protect the existing home, keep the site organized, and explain each phase in advance so you know what is changing next.
Can concrete and stucco damage be repaired together?
Often yes, because the causes overlap. Settling slabs, poor drainage, and failed flashing frequently damage both. We trace the moisture or movement to its source, correct it, then repair both surfaces so the problem does not return.
How do drywall and painting stay clear of finished work?
We schedule trades in a deliberate order: drywall finishing and sanding, then priming and painting, with doors and hardware installed once surfaces are ready. Floors, fixtures, and adjoining rooms stay protected, and touch ups finish before closeout.
What matters when replacing doors and hardware on commercial property?
Confirm how each door is used, who needs access, and whether frames are square and sound. We evaluate every opening, match hardware to its traffic, and coordinate installation so the building stays secure and operational.